TAGS

• Test Probe B of IEC61032

  The Jointed Test Finger is a precision test probe made according to Figure 2 (Fig. 2) of the IEC 61032 (Test probe B) and is used to simulate a human finger. It is also used by the standards of CSA, I

• Unjointed Test Finger - Test Probe 11 of IEC61032

  The Rigid Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of CSA, IR

• Multiple Energy Spring Hammer

  The Spring Hammer is examined with accessibility probes to determine access to chock,energy,and injury hazards. Built in exact accordance to IEC/EN/UL/CSA and other standards.

• 50mm Diameter Test Steel Ball of IEC60950

  The Impact Ball 50mm is designed to test impact according to IEC, UL, and CSA standards. The Impact Ball complies with IEC 60950. It is made of stainless steel.

• IEC Standard Articulated Test Probe

  IEC Standard Articulated Test Probe is a precision test probe made according to Figure 2 (Fig. 2) of the IEC 61032 (Test probe B) and is used to simulate a human finger. It is also used by the standar

• IP2X Test Finger Probe Tester with 50N Thrust

  IP2X Test Finger Probe is a precision test probe made according to Figure 2 (Fig. 2) of the IEC 61032 (Test probe B) and is used to simulate a human finger. It is also used by the standards of CSA, IR

• IEC Standard Test Probe 11 with 50N Thrust

  IEC Standard Test Probe 11 is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of CS

• Rigid Test Finger Probe with 75N Thrust

  Rigid Test Finger Probe is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of CSA,

• 40mm 265g Steel Ball with Eyebolt of IEC60065

  The Impact Ball 40mm is designed to test impact according to IEC, UL, and CSA standards. The Impact Ball complies with IEC60065. It is made of stainless steel.

• IEC Jointed and Unjointed Test Finger

  The Jointed Test Finger & Unjointed Test Finger is a precision test probe made according to Figure 2 (Test Probe B) and Figure 7 (Test Probe 11) of the IEC 61032 is used to simulate a human finger, us